| Overall Height | 9′ (274 cm) boom down |
|---|---|
| Fork Carriage | 48″ (122 cm) standard |
| Ground Clearance | 19″ (48 cm) |
| Overall Length | 22′ 11″ (699 cm) to fork frame |
| Overall Width | 8′ 6″ (259 cm) |
| Pallet Forks | 2.25 x 4 x 48″ standard |
| Approximate Operating Weight | 32,500 lbs (14,742 kg) with outriggers |
ENGINE –
| Model/Power | 117 HP (87 kW) Cummins QSF3.8 Tier 4 turbo diesel with DEF and SCR aftertreatment |
|---|---|
| DEF Tank | 5 gal. (19 L) |
| Fuel Tank | 30 gal. (114 L) |
HYDRAULICS –
| System | Pressure comp, axial piston pump |
|---|---|
| Features | Fully proportional functions Auxiliary boom tip hydraulics Quick disconnect for attachments |
| Controls | Single joystick, pilot operated |
PERFORMANCE –
| Max Load Capacity | 12,000 lbs (5,443 kg) |
|---|---|
| Maximum Lift Height | 58′ 6″ (1,783 cm) |
| Landing Height | 58′ 6″ (1,783 cm) |
| Maximum Forward Reach | 47′ 10″ (1,458 cm) at 24″ LC 42′ (1,280 cm) non-traversed |
| Below Grade Reach | 3′ 2″ (97 cm) |
| Maximum Travel Speed | 15.2 mph (24.5 km/h) |
| Turning Radius | 14′ 4″ (437 cm) |
| Drawbar Pull (GVW) | 31,800 lbs (14,424 kg) |
| Frame | 24° of leveling (12° right and left) Rear axle stabilization system |
| Transmission | Dana VDT12000 Series, 3-speed Powershift, forward & reverse |
| Axles | Dana 223 Series: 4-wheel drive, 45% limited slip front differential |
| Steering | 4 wheel, 2 wheel, and crab steer |
| Brakes | Oil-immersed inboard disc service brakes, integral front SAHR park brake |
| Tires | 14.00 x 24, 16 ply, G2 tread air-fill standard |
| Boom | 4-section, slide pad Automatic fork leveling without slave cylinder |